rice husk small straw wood sawdust biomass briquette machine
Main technical data
| Type | Power | Capacity | Diameters of product | Dimension | | IV | 15KW | 140-200kg/h | 50mm | 1.65*0.6*1.6m | | V | 18.5KW | 220-280kg/h | 50mm | 1.65*0.6*1.6m | | 500 | 22kw | 350-420kg/h | 50mm | 1.9*0.6*1.8m | | 80 | 22kw | 500-550kg/h | 80mm | 1.9*0.6*1.8m | |
| Moisture content is 8-12%. |
| Requirements on the size of the materials: the diameters of the raw materials are between 1mm and 5mm |
Product details:
1. Introduction-- biomass diesel wood briquette machine
sawdust biomass briquette machine is used to make wood briquettes. Its raw material can be stalk, straw , sawdust, coconut shell, rice hust, rice stalk, tree branch and so on. The final wood briquettes can be used as the fuel of boiler or the material to make charcoal.
2. Step of briquette making&requirement-- biomass diesel wood briquette machine
crushing-----drying------briquettes
Moisture:raw material humidity:8-12%
diameter of raw material :less than 5mm
3. The final product of our wood briquette machine
4. Production step ---- wood briquette machine
1) fastening bolts, especially in the heating barrel set of three top wire, connecting and electrical power lines.
2) check bearing lubrication part.
3) check the supply voltage is normal.
4) no-load starting running 30 minutes, no card, touch the abnormal phenomenon, can be put into normal production.When the trial revealed abnormalities, should immediately stop, find out the reasons, troubleshooting and then makes no-load operation.
5) the temperature regulator adjusted to the required temperature, when the temperature reaches a predetermined temperature before starting, and amount of feed.
6) gradually increased feeding rate, until the production of qualified products, produced when the normal 30 minutes, can show trial run is successful, the normal operation of.
At the end of 7 to make the hopper feeder with no raw material , and after shutting down the machine immediately reversed for 1 minutes, so that the propeller material would be exit.
The machine body must be well grounded!!!
Q: What is the guarantee time ? if machines broken or lost during sea freight who will take responsible ?
A: Guarantee time is for one year from Machine arrive customer sea port. for every export machine we buy insurance for it . if machine lost or broken during sea freight . we take responsible for it .
Q: During Guarantee time , if machine broken by machine design ,what should we do?
A: during guarantee time , if machine broken by machine design fault , we talk all responsible , for machine broken part free charge send to you , if after change broken part machine can not work , we would send new machine to you for exchange.
Q: Which kind documents your company can provided?
A: after ship depart from China port ,we can get documents from Shipping company such as : bill or lading , insurance documents.packing list , commercial invoice . if you need , we also can apply CO ,FORM F, FORM E etc.
Q: After guarantee time , if we need spare parts , can you provided it ?
A: we can provided for the machine spare part .
Q: Which kind of package you will use ?
A: For export , we usually use plywood box . which meet export standard.
